Follow these simple steps to customize your lighting in the Fluidra Pool App if you have Flexi(Mini) Connect TW lamps:

1. Go to “Equipment” and select “Light modulator”.

2. Default settings:

When you enter the screen, the default color is white at 100% brightness.

You can adjust the lighting by:

• Selecting a preset from the horizontal gallery bar

• Using the Color temperature and Brightness sliders

  • Color temperature range: 2500K–6000K (steps of 50K)

  • Brightness range: 2%–100%

    (in 5% increments except 2%–5%, where only 3% applies)

  

3. The current color is shown inside the large circle, reflecting temperature and brightness settings.

4. You can turn the lighting ON/OFF using the switch in the top right corner.

5. Click the three dots (top right) to open the menu. Select “Gallery editor” and choose between:

• Fixed → single-color lighting

• Sequences → color sequences

  The gallery bar displays 8 fixed presets followed by 8 sequence presets.

  To switch between fixed or sequence, you must first select a preset from the bar.

6. In “Edit gallery fixed”, you can modify color temperature and brightness using the sliders.

7. In “Edit gallery sequence”, you can:

• Create a sequence

• Adjust fade type and speed (from x1 to x8)

• Add colors using the + button (maximum 8 colors)

• Tap “Preview sequence” to see it in the app and in the pool (if connected to Wi-Fi)

• Tap “Stop preview sequence” to end the preview

8. Click “Save changes” to confirm your settings.