To pair your compatible chlorinator with the Fluidra Pool app, follow the steps below or watch the instructional video further down the page.

  1. Log in to the app

    Open the Fluidra Pool app and go to Equipment from the bottom menu.

  2. Scan the QR code

    When prompted, scan the QR code located on your chlorinator.

  3. Activate pairing mode

    When the app instructs you, press and hold the Home button on your chlorinator for 5 seconds.

    The device will flash while synchronizing, and the Bluetooth icon will start blinking during pairing.

  4. Confirm connection

    Continue following the steps in the app. Once pairing is complete, you’ll see a confirmation message that your chlorinator is now connected.

  5. Connect to Wi-Fi

    To finish configuration, connect your chlorinator to the Internet:

    • Select your Wi-Fi network.

    • Enter your network password.

     

    The app will confirm once the configuration has been successfully completed.

 

                               
If you haven’t yet added your pool information, the app may prompt you to do so after setup. You can always modify pool settings later in the Pool Settings menu.

 

If you haven’t found the information you’re looking for in our Help section, don’t hesitate to contact us through the Support chat. If you’re experiencing a technical issue with your equipment, please check the equipment manual for troubleshooting steps and/or contact your installer for assistance.