Follow the steps below to properly mount and connect your iQBridge RS.

 1. Mount the iQBridge RS

Use the installation kit provided to mount the iQBridge RS:

  • Either on a wall, close to the device it will be connected to, using the screws provided.

  • Or directly on the device, using the double-sided tape (included in the kit).

2. Connect the iQBridge RS

  1. Disconnect the main power supply from the device (e.g., heat pump, saltwater chlorinator) before connecting the iQBridge RS.

  2. Plug the iQBridge RS into the compatible port on your device.

    Look for the dedicated watertight plug, which is located:

    • On the electrical connection panel for heat pumps.

    • Hanging below the unit for saltwater chlorinators.

     

 

 

    • The power indicator light on the iQBridge RS should turn steady green — this means it’s correctly powered and connected.

      Once connected, restore the power supply to the device.

       

     

💡 The iQBridge RS is powered directly by the connected product (heat pump, saltwater chlorinator, etc.).

If you haven’t found the information you’re looking for in our Help section, don’t hesitate to contact us through the Support chat. If you’re experiencing a technical issue with your equipment, please check the equipment manual for troubleshooting steps and/or contact your installer for assistance.